Essential Tips for Setting Up Your 4×4 For Towing – Pedders Suspension & Brakes
Are you hitting the road these holidays with a caravan, boat, or trailer in tow? Before you rev up your 4×4, take a moment to ensure your setup is safe, legal, and road-ready. Here are five must-know towing tips to keep you on track, courtesy of Pedders Suspension and Brakes.
Start with the basics: check your vehicle’s Towing Capacity and Gross Vehicle Mass (GVM). These critical specs can be found in your owner’s manual or near the driver’s door sill. Overloading can void your insurance, lead to fines, and compromise safety. Remember, your Tow Ball Down Weight (usually 10% of the trailer’s weight) is included in your GVM, so double-check the numbers before you hitch up.
If heavy towing causes your vehicle’s rear to sag or affects handling, it might be time for a suspension upgrade. Pedders offers solutions like heavy-duty springs, shock absorbers, and AirAssist air suspension to keep your ride smooth and controlled.
Before you head off, ensure your Tow Bar is in top condition and rated for your load. Don’t forget to check the trailer’s lights, braking systems, and wheel bearings. Safety starts with a solid connection, so make sure your Tow Bar and trailer work together seamlessly.
Does your vehicle slant under the weight of towing? Pedders’ range of heavy-duty components can restore ride height and balance, ensuring your vehicle performs as it should—even under heavy loads.
Need to increase your vehicle’s payload capacity? A Pedders GVM+ Upgrade might be your solution. Tailored to your needs, this upgrade enhances your vehicle’s capability to handle additional weight legally and safely.
Towing is about more than just hitting the road—it’s about doing it right. With expert tips and tailored solutions from Pedders Suspension and Brakes, you can tow with confidence this Towvember.
Visit Pedders Suspension and Brakes for more tips and tailored towing solutions!
Recent Post:
Categories:
Tags:
Key Industry Partners
